| Last additions - writt |
cocosets2.jpgCocobolo Wood Sets155 viewsThis pic is of the first sets of Stanley wood out of cocobolo. They have been polished to P600, a light coat of "Tony's Goop" applied and several coats of wax. writtNov 24, 2011
|
|
miterbox1.jpgMiter Box 1145 views Side View of Unknown Miter Box writtSep 13, 2011
|
|
miterbox2.jpgMiter Box 2104 views Side View of Unknown Miter Box writtSep 13, 2011
|
|
miterbox3.jpgMiter Box 390 viewsBottom view of unknown miter box writtSep 13, 2011
|
|
knob_blank_1.jpgKnob Blank135 views I cut the knob blank 2"X2"X2". The top and bottom must be very parallel. and the height is the finished height of the knob. On the top drill a 7/16" diameter hole 1/2" deep for the brass mounting nut. On the bottom drill a 19/32" diameter hole 1/2" deep to fit over the boss on the plane. Then drill a 5/16" hole through. Turning is the last thing I do. writtJun 05, 2011
|
|
knob_blank_2.jpgKnob Blank Bottom114 views This is the bottom of the knob blank. You can see the 19/23" diameter hole and the 5/16" diameter thru hole. writtJun 05, 2011
|
|
lathe_fixture.jpgKnob Fixture136 views This is the fixture for turning the knob. It is tapped 1/4-20. The large hole in the bottom of the knob fits over the small diameter on the fixture uo to the face of the larger diameter and is held on with a 1/4-20 socket cap screw. writtJun 05, 2011
|
|
lathe_setup.jpgLathe Setup130 viewsI use a live center for turning because there is a lot hanging out of the spindle. The center is removed for shaping the top of the knob. writtJun 05, 2011
|
|
plough1.jpgPlough Left Side156 viewsScrew Arm Plough Plane Left Side writtMay 29, 2011
|
|
plough2.jpgPlough RT Side125 views Screw Arm Plough Right Side writtMay 29, 2011
|
|
plough3.jpgPlough Mark104 viewsMakers mark for screw arm plough plane writtMay 29, 2011
|
|
mahog_plane_1.jpgFront View261 viewsThis view shows the front. You can see the cutter held to the frog with a thumb screw turning in a brass casting. writtApr 18, 2011
|
|
|
|
Image Central 
