Galoot Central
Home arrow Image Central
Friday, 19 January 2018
Galoot Image Central - Search results

Galoot Image Central

Pics from the Porch

Home :: Login
Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search

Search results - "threads"
cutterthreads.jpgWhatsit73 viewsThe threads inside these cutter things. Not sure why they'd be threaded, not sure what they are.madwing
threadyshaft.jpgWhatsit61 viewsThe name on the shaft of the thing with the threads.madwing
notscrews.jpgWhatsits59 viewsBrass, steel, potmetal, I can't tell what. Look like, for the most part, screws that have no threads/slot, or cotter pins with no holes.madwing
Moxon_style_vise-front_view.JPGMoxon style vise - front view248 viewsThis Moxon style vise is made from a knotty (and very gnarly) length of Purpleheart. The jaws are about 27 inches long, the right angle brace glued to the rear jaw is about 33 inches long. The jaws are about 7 inches tall bringing their top edge to about 40 inches from the floor. The jaws are about 7/8 inch thick. The maple hand screw threads are 1 1/4 inches. There is about 21 inches between the screws. I used an old 1/4 inch beading plane to bead the top and bottom edges of the front jaw.Sgt42RHR
MoxonPerhaps.JPGWNY 2011 - Threading Tools97 viewsWestern NY Galootapalooza
I brought my 1 1/4 inch threadbox and the nut grinder I made to go with it. We threaded a maple screw and cut internal threads in a block of walnut. Moxon vise, anyone?
Moxon_vise_complete3.jpgMoxon's backside122 viewsWith a 3/4" piece in the vice I have about 6" of threads leftroy griggs
IMG_2545es.jpgDetail of Gutenberg Press replica451 viewsThe included angle of the screw threads appear to be about 100 degrees.Schwartz
IMG_2730s.JPGOak wood screw of a large antique German grape-press788 viewsIf I recall correctly, this screw was about 6 in. in diameter. The thread profile appears to be round about 100 degrees.Schwartz
beechthreads1.jpg37 viewsGreg Isola
beechthreads2.jpg45 viewsGreg Isola
Barnes_lathe_headstock.jpg43 viewsF.W. Barnes treadle powered metal lathe headstock, showing change gears for thread cutting. The brass plate at the lower center lists what gear combination would cut what pitch of threads.galootgary
100_7353.JPGinternal threads52 viewsThe internal threads are done. Rough around the edges and especially on the end grain, but quite workable.dlarue
19 files on 2 page(s) 1

Member Login
© 2018 Galoot Central
Joomla! is Free Software released under the GNU/GPL License.
View Jim Esten's profile on LinkedIn