| Most viewed - OldSneelock's Gallery |
Drill_Press_Corner.JPGWorkshop - Drill press corner98 viewsOnce again more stuff. OldSneelock
|
|
Workshop_-_I_m_building_drawers_as_fast_as_I_can.JPGWorkshop - Bench vise 98 viewsJust a few more pieces and I'll have the whole set of junkOldSneelock
|
|
Fulton_Block_Plane_(10).JPGFulton Stamping on blade96 viewsOldSneelock
|
|
|
Fulton_Block_Plane_(6).JPGSimilar to SARGENT No.217 (220) BLOCK PLANE. c.1920.91 viewsPer information found on http://www.antique-used-tools.com/sargent.htm this is similar to a SARGENT No.217 (220) BLOCK PLANE. c.1920.OldSneelock
|
|
Chapman_Movable_Forge_Treadle_Grinder_Clutch.JPGTreadle Grinder Clutch89 viewsFrom the looks of the layout there was a strap attached to the two screws on the left hand hub of the clutch. When the pedal is pushed down the strap unwinds causing the clutch to engage and rotate the shaft and large flat belt pulley. When the pedal is released the clutch ratchets back and resets for another pulse.
OldSneelock
|
|
|
DSC00807.JPGGalootaclaus 2010 Saw Till86 viewsMike sent this till loaded with a Disston and an Atkins saw. All three are welcome additions to the small but growing group of saws and sawing tools that I use or intend to use, for current and future projects.
I'm currently working on learning the skill of saw sharpening. I could just send saws off for sharpening to one of the many skilled professionals but I want to do the work myself. OldSneelock
|
|
036.JPGPiercing Awl79 viewsSmall awl with what looks to be a 30 caliber brass shell as a ferule.OldSneelock
|
|
Workshop_-_10_or_12_projects_at_once.JPGWorkshop - 10 or 12 projects at once79 viewsJust when your ready to finish you get called away, or something shiny catches my eye and off I go.OldSneelock
|
|
010~0.JPGSingle Helix Auger Bits78 views#5 through 22 single helix auger bitsOldSneelock
|
|
|
| 276 files on 23 page(s) |
 |
|
|
|
|
5 | |
|
|
|
|
|
|
|
Image Central 
