Shop Pix |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
| POSITION |
+ |
- |
|
|
100_2718.JPGdie stock bit stock47 viewsTakes a standard 1 inch die. I find it helps keep you in line with the work using the brace.dlarue
|
|
100_3997.JPGlight shaves40 viewsmostly Stanley #64 shaves, plus a few others.
This was taken a few years ago. There are more shaves now...dlarue
|
|
100_2347.JPGDavid's first dovetails38 viewsThese are my son's first dovetails. July 2009. I've seen worse. Heck, I've done worse.dlarue
|
|
SteamBox.JPGSteam Box267 viewscheap propane burner, old pot, rad hose, box made of crummy 1X pine. The hardest part was drilling the hole in the lid using my post drill.dlarue
|
|
shelves.JPGmedia cabinet48 viewswhite pine media cabinet. Dovetailed carcass, one fixed shelf, 4 adjustable shelves.dlarue
|
|
ogee_bracket_foot.JPGogee bracket foot40 viewsBracket foot base made using #20 hollow and round planes.
Cut out using a fret saw.dlarue
|
|
cornice.JPGcornice molding41 viewsThis is the cornice or crown molding I made using some hollows and rounds.dlarue
|
|
molding_cove.JPGmolding first cove55 viewsFirst cove has been cut. The plowed groove serves to guide the round plane. You're supposed to cut fro the far end back, but I find that this does not work for me when using Hollows & Rounds. I run the full length of the stock. Keeps things more even.dlarue
|
|
molding_cove2.JPGMolding, two coves45 viewsBoth coves are done now. Next the convex part needs to be molded.dlarue
|
|
molding_done.JPGMolding Done47 viewsHere's the finished molding. I knocked the corners off with a drawknife and planed down to my layout with a Stanley #4 smoother.
The molding is propped up at the angle it will be installed at, with some oblique lighting to highlight the shape.dlarue
|
|
molding_layout.JPGMolding Layout43 viewsHere's the layout of the molding I want to make. This is just a rough guide. If things go well, it will look like I followed this layout. Otherwise, I just get what I get.dlarue
|
|
molding_planes.JPGMolding Planes63 viewsHollows & rounds and a skew rebate plane.
This is all you need to make this molding.
Actually, I also used a block plane and a shoulder plane. My bad.dlarue
|
|
| 311 files on 26 page(s) |
|
|
|
|
|
|
|
|
22 | |
|
|
|
|
Image Central 
