Hodgepodge |
|
TITLE |
+ |
- |
FILE NAME |
+ |
- |
DATE |
+ |
- |
POSITION |
+ |
- |
|
|
hollyshave4.jpgCreating the ware or throat178 views(corrected description) Use of a small tenon saw prior to light mallet blows and a chisel to clean out the wasteCharlie Driggs
|
|
hollyshave6.jpgCompleting installation of the brass wear plate169 viewsPlate and screws filed flush with the shave body, and next step was to finish shaping the body. That was done with a variety of rasps and a few files.Charlie Driggs
|
|
hollyshave7.jpgCompleted spokeshave236 viewsSanded with fine, extrafine & superfine 3M pads, spit coat of blonde shellac, and a coat of clear Mylands wax, then buffed a bit ... not your usual looking spokeshave. Works well too. Last time I made a spokeshave was a decade ago, so this was a fun revisit as a first real project in getting back to the workshop after a long recovery from breaking a leg. The LV kit made it a bit easier too, but making a shave isn't hard if you have something suitable for a blade.Charlie Driggs
|
|
IMG_0519.jpgWizard cane142 viewsThis cane was carved from a western red cedar blank, and is beautifully done. Generates a response in nearly anyone who sees it, and usually a smile. A well-appreciated surprise gift from a fellow Galoot and good friend.Charlie Driggs
|
|
elm_cane_2.jpgElm & Brass cane134 viewsThis one came together with about four hours of work. It has some weight, and feels great in the hand.Charlie Driggs
|
|
shuteboard2.jpginclined ramp shute board229 viewsPut together in about 2 hours from scrap white oak ply and solid maple scraps from a table reconstruction. 15" x 11" bed, inclined ramp that supports the MF 14 as the miter planeCharlie Driggs
|
|
Elm_burl_handle_4.JPGrehandling a Buck chisel with 100 yr old elm burl202 viewsCharlie Driggs
|
|
veneerhammer2.jpgveneer hammer126 viewsamerican holly handle, indian rosewood body, ΒΌ" brass edgeCharlie Driggs
|
|
Witherby_butt_chisels.jpgWitherby NOS with butt chisel handles added184 viewsCharlie Driggs
|
|
|
|
|
|