Galoot Central
Home arrow Image Central
Saturday, 02 June 2018
Galoot Image Central - Craftsman Rocker

Galoot Image Central

Pics from the Porch


Home :: Login
Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search

Home > User galleries > rbrendler > Craftsman Rocker

TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
POSITION  +   - 
After1.jpg
After1.jpg116 viewsThis is the joint that had come apart. I managed to get it cleaned up and loose enough to get some hide glue into the mortise with a syringe. The joint closed up really well, and the repair is pretty much undetectable.rbrendler
After2.jpg
After2.jpg76 viewsTwo of the glue blocks were removed, the old glue scraped off, and re-glued. It's nice and solid now.rbrendler
After3.jpg
After3.jpg129 viewsThe final product, after gluing the loose joints, cleaning, and a couple coats of shellac. Now all that's left is to make a cushion.rbrendler
Before6.jpg
Before6.jpg82 viewsTop is done with through tenons, and has a very nice easing of the top rail.rbrendler
Before7.jpg
Before7.jpg100 viewsThe underside of the chair, showing the figured maple slats and the genuine Stickley bailing wire holding the sides together.rbrendler
Before8.jpg
Before8.jpg77 viewsYet another old repair-- loose glue blocks were held in place with nails. Well done repair, and easy to reverse.rbrendler
Number.jpg
Number.jpg76 viewsThe stencilled number on the back rail. It's a Stickley-style number (2 groups of 3 digits), but several manufacturers used this style.

Further research found that this is in fact a Stickley piece. This model was produced by Stickley Brothers of Grand Rapids.
rbrendler
Before1.jpg
Before1.jpg125 viewsMy find from the August 2007 Kane County Flea. A craftsman-style rocking chair that needs a bit of work...rbrendler
Before2.jpg
Before2.jpg67 viewsThe front-left tenon was loose, but luckily nobody had tried to repair it with a non-reversible glue. Will be pretty easy to clean out and fix with hide glue.rbrendler
Before3.jpg
Before3.jpg98 viewsAnother old attempt at a repair. A couple of carpet tacks and butcher's twine.rbrendler
Before4.jpg
Before4.jpg72 viewsBoth arms were loose, so I was able to see the joinery. This piece used a dowel to hold the arm instead of a through tenon like the higher-end piecesrbrendler
Before5.jpg
Before5.jpg73 viewsShowing the faux-through tenons on the back slatsrbrendler
12 files on 1 page(s)

Member Login
 
© 2018 Galoot Central
Joomla! is Free Software released under the GNU/GPL License.
View Jim Esten's profile on LinkedIn