Tools |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
| POSITION |
+ |
- |
|
|
TomResaw.jpgTomResawing113 viewsAntique saw found in a shop in central New York state (near Canandaigua) and rebladed with a piece of 1/2"-wide non-hook bandsaw blade. Taken about 1997, before digital cameras, but now scanned for sharing.Tom11
|
|
45boxClosed.jpgShop-made box for Stanley #45 combination plane137 viewsThe sides are pine, and the top and bottom panels from a salvaged plank of poplar. The logo was taken from the period-appropriate version on my #45 instruction booklet, enlarged on a copier, traced onto the lid, and pyrographed (woodburned).Tom11
|
|
45boxLid.jpgSliding lid of box for Stanley #45136 viewsShowing the grooves on three sides, like the "candle box" configuration.Tom11
|
|
45boxInside.jpgInside of box for Stanley #45177 viewsShowing the interior arrangement, with a fitted place for the cutter boxes on one side, and room to store the plane with long arms in place.Tom11
|
|
Gauge_Knob.jpgGauge & knob163 viewsShowing 3/8" brass threaded insert to receive set screw. The knob was made by screwing a brass bolt (slathered with epoxy) into the cherry piece, then cutting off the head of the bolt and smoothing the cut end.Tom11
|
|
GaugeFront.jpgUser made marking gauge149 viewsMade from cherry scraps. The pin is from a broken twist drill, secured with a small brass bolt with nut fixed in recess. Wear strip is from trashed zig-zag rule. Knob has a 1/4" brass bolt shaft.Tom11
|
|
HlwAuger.jpgHollow augering244 viewsAA Wood hollow auger, used to put round tenons on square spindles for A&C coffee table.Tom11
|
|
TablTools.jpgTable tools285 viewsJack plane w/ Hock iron and cap iron, 136 caliper rule, noname spoke pointer, small combo quare, AA Wood hollow auger, #3 smoother w/Hock iron and cap iron--used in making A&C coffee table.Tom11
|
|
|
|
Image Central 
