Linenfold |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
| POSITION |
+ |
- |
|
|
round.jpground plane113 viewsusing a round plane to shape the convex part of the profiledlarue
|
|
Rebates.jpgRebates102 viewsStanley 78 rebate plane, followed up by a skew rebate on the cross grain.dlarue
|
|
profile.jpgprofile103 viewsstack of profiled panels.dlarue
|
|
plowing.jpgplowing111 viewsRapier 43 plow for the narrow grooves. I used a Record O50 for the 1/2 inch grooves.dlarue
|
|
linenfold_wip.jpgsmaple panels completed44 viewsfinally finished off the sample panels, getting ready to build a chest with them.dlarue
|
|
Linenfold_sample.jpgsample panels completed40 viewsmocking up the chest front with the completed panelsdlarue
|
|
linenfold_dryfit.jpgdry fit linenfold chest18 viewshere's the dry fit.
I have put a coat of buttonlac on the carved panels already.
Box is 39 inches long and 18 inches wide.dlarue
|
|
linenfold_chest.JPGlinenfold chest20 viewsshe is done!
white pine, butternut pegs, shellac finish, sisal rope, Tremont nails.dlarue
|
|
I_bin_framed_I_tells_ya.jpgframed18 viewsI bin framed, I tells ya!
still have a few grooves to cut, all the rails and stiles have been fit together.dlarue
|
|
hollow.jpghollow plane114 viewsusing a hollow plane to shape the concave part of the profile.dlarue
|
|
grooves.jpggrooves111 viewsthese are the grooves, shallow 1/2 inch grooves for the round plane to follow, and narrow deep grooves to set the second layer of the carving.dlarue
|
|
chisels.JPGChisels127 viewsThese are the chisels I used to do the carving. 90% of it was done with the 10mm #5 sweep Henry Taylor gouge. The little skew chisel came in REALLY handy in the tight corners.dlarue
|
|
| 22 files on 2 page(s) |
|
1 | |
|
Image Central 
