Galoot Central
Home arrow Image Central
Saturday, 02 June 2018
Galoot Image Central - Moxon style vise

Galoot Image Central

Pics from the Porch


Home :: Login
Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search

Home > User galleries > Sgt42RHR > Moxon style vise

TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
POSITION  +   - 
Moxon_style_vise_-_end_view.JPG
Moxon_style_vise_-_end_view.JPGMoxon style vise - end view197 viewsThe right angle brace is about 3 inches longer on each end than the jaws to allow for clamping to the bench; it's rock solid! I used an old 1/4 inch beading plane to put a bead on the exterior edge of the rear and front jaws to soften them visually and for comfort of use.Sgt42RHR
Moxon_style_vise-front_view.JPG
Moxon_style_vise-front_view.JPGMoxon style vise - front view248 viewsThis Moxon style vise is made from a knotty (and very gnarly) length of Purpleheart. The jaws are about 27 inches long, the right angle brace glued to the rear jaw is about 33 inches long. The jaws are about 7 inches tall bringing their top edge to about 40 inches from the floor. The jaws are about 7/8 inch thick. The maple hand screw threads are 1 1/4 inches. There is about 21 inches between the screws. I used an old 1/4 inch beading plane to bead the top and bottom edges of the front jaw.Sgt42RHR
Moxon_style_vise_-_rear_view.JPG
Moxon_style_vise_-_rear_view.JPGMoxon Style Vise - rear view189 viewsThe maple nuts came as 4 inch squares, I cut 1 inch off of each corner and affixed them to the rear jaw with a couple of screws. The rear jaw is 7 inches high, and the right angle brace is about 1 3/4 inches thick and 3 inches wide. I used an old 1/4 inch beading plane to on the top of the rear jaw and the back of the right angle brace.Sgt42RHR
 
3 files on 1 page(s)

Member Login
 
© 2018 Galoot Central
Joomla! is Free Software released under the GNU/GPL License.
View Jim Esten's profile on LinkedIn