|
|
|
Vise problem 2
|
|
The backing slabs could move up to 1/8 inch under offset clamping force because the 3/8 inch bolts run through 1/2 inch holes. No way can 3/8 inch bolts resist the clamping force of 1 1/2 inch acme thread steel vise screws! I decided to fix this problem by boring holes for tight-fitting dowels which will prevent any movement. Here I am boring the 3/4 inch holes from underneath the top for the pegs. The holes pass through the slabs which back the face vise and well up into the benchtop itself. 3/4 inch maple dowels will be driven through these holes and up into the benchtop.
|
|
 |
|
IMG_1051.JPG
|
IMG_1027.JPG
|
IMG_1061.JPG
|
IMG_1062.JPG
|
IMG_1036.JPG
|
|
|
|
Image Central 
