|
BLO or Paraffin Wax?
|
Both screws were turned to 0.60in ( 0.025in undersize), then roundered, resulting in flattened crests on the thread. No.7 , the top screw, was cut after wiping the sized dowel down with BLO. The lower screw No.6 was lightly rubbed with paraffin wax after sizing. I fully expected a failure on this one, as it started badly, breaking out 3 inches of twisty grain, and forcing a restart.
|
|
|
|
2012_0004cs.jpg
|
2012_0006cs.jpg
|
2012_0019s.jpg
|
2012_0030cs.jpg
|
2004-00748s.jpg
|
|
|
|